Why Choose Swisstek Quick Flow?

• Excellent adherence to concrete surfaces.
• Simple to use (just add water).
• Allows convenient levelling without imperfections.
• Provides a flat and smooth finish.
• The product’s efficiency saves time for all.
• Comes pre-mixed, and therefore, ensures quality and good consistency.

Directions For Application

• Clean the application surface by removing all loose foreign particles like dust, oils, dirt, and grease.
• Remove cement laitance and also any pre-existing paint, coatings, or coverings from the surface.
• For better bonding, it is recommended to apply the primer beforehand.
• Follow the ratio of 260 ML of water to 1 KG of the compound (subject to slight changes) and create the concoction in a container, continuously combining the mixture with a mixing machine.
• Mix vigorously for a minimum of 3 minutes until a smooth consistency is achieved (adjust the consistency with more water or powder as needed).
• Pour the mixture onto the prepared floor while the primer is still tacky (Note: If the primer has dried, it should be re-applied to maximize adhesion).
• If necessary, the compound can be trowelled to achieve the expected finish.
• Allow the surface to dry for 48 hours (Note: Time may vary with the weather conditions).
• After 24 hours, wet the surface consecutively for one week.

Additional Tips

• Store the product in a dry place.
• Once a bag of Skim Coat is opened, seal them tight and well to prevent exposure to air.